SouthWing BOFLX Benutzerhandbuch
Accepting/rejecting* a call
When the phone rings (the ring tone can be heard in the headset), briefly press the
Multi-function button [2] once to accept the call. Alternatively, press and hold the
Multi-function button [2] for 1 second to reject the call.
Changing the volume
To increase the volume during a call, press Vol+ button [3]. To decrease the volume,
press the Vol- button [4]. The headset will remember previous volume settings each
time it is turned on.
Automatic answer (call pick up)
You can configure the headset to automatically answer all incoming calls after 3
seconds, to do so while in the ON state press Vol- for 3 seconds until you hear a beep.
To disable automatic answer repeat the above action.
Initiating a call from your mobile phone
Dial the number as usual with your phone. If your headset is on and the phone has been
correctly connected, your phone will transfer the call to your headset.
Initiating a Call with Voice Dialing
To voice dial press briefly the Multi-function button [2] and wait for the feedback tone
from the phone. Then speak the name of the person you wish to call.
When the phone rings (the ring tone can be heard in the headset), briefly press the
Multi-function button [2] once to accept the call. Alternatively, press and hold the
Multi-function button [2] for 1 second to reject the call.
Changing the volume
To increase the volume during a call, press Vol+ button [3]. To decrease the volume,
press the Vol- button [4]. The headset will remember previous volume settings each
time it is turned on.
Automatic answer (call pick up)
You can configure the headset to automatically answer all incoming calls after 3
seconds, to do so while in the ON state press Vol- for 3 seconds until you hear a beep.
To disable automatic answer repeat the above action.
Initiating a call from your mobile phone
Dial the number as usual with your phone. If your headset is on and the phone has been
correctly connected, your phone will transfer the call to your headset.
Initiating a Call with Voice Dialing
To voice dial press briefly the Multi-function button [2] and wait for the feedback tone
from the phone. Then speak the name of the person you wish to call.
Note: your phone must support voice dialing and you must first record voice tags into your phone
associated to phone numbers (please check your phone manual for details)
associated to phone numbers (please check your phone manual for details)
Redial the last called number
Press briefly the Multi-function button [2] twice; the last called number will be
automatically dialed.
Ending a call
Press the Multi-function button [2] briefly during a call and the call will be ended.
Transferring a call from the Headset to the mobile
During a call, you may wish to transfer the call to your mobile, to do so press the Multi-
function button [2] twice. To transfer the call back to the headset repeat the same
command.
Push4
TM
Favorite number
It is possible to save a favorite number in the headset and speed dial it with the Push4
TM
Multi-function button [2]. This number can be automatically saved from the last
incoming call number (not compatible for hidden or unidentified call numbers). To do
so, once the received call has ended, press and hold both Multi-function button [2] and
Vol+ buttons for 1 second, until you hear a series of tones.
To call the stored favorite number, press and hold the Push4
incoming call number (not compatible for hidden or unidentified call numbers). To do
so, once the received call has ended, press and hold both Multi-function button [2] and
Vol+ buttons for 1 second, until you hear a series of tones.
To call the stored favorite number, press and hold the Push4
TM
Multi-function button [2]
for 1 second.
Changing the ring tone
To change the default ring tone in the headset enter the ring tone menu by pressing
either Vol+ or Vol- buttons for 5 seconds. Next, use the Vol+ and Vol- to select the new