GLOBAL HOLDING GROUP CO. LTD CQ1000 Test Setup Photos

Respectfulusers:

Thank you for purchasing our Bluetooth Mini speaker. In order to operate it

correctly,Pleasereadthisusermanualcarefullybeforeusingit.

※ Keep speaker away from water and moisture,do not get it wet.
※ Keep speaker away from any heat source.

.

※ Please adjust to asuitable volume to avoid damaging your health.

Picture1

RatedImpedance:4Ohm

Weight:187g

RatedPower:3w

RatedVoltage:DC5V

Auxin:3.5mmaudi ojack

Frequencyresponse:90-20KHz

SNR: ≥85db

Sensitivity:80db ±2db

Distortion: ≤0.3%

Size:mm

Powersupply:DC5VBuilt-inLi-ion battery

Speaker,USB cable,manual,3.5mm audio cable

●

Built -in Bluetooth 2.1+EDR wireless module

●

Bluetooth audio sound, perfect sound quality and bass effect

●

10M transmission distance

●

Support  iPhone,iPad and other devices with Bluetooth function 

●

Bluetooth hand free function,answer call easily

●

Bluetooth music controlling functions

●

Built-in li-ion battery

●

3.5 audio input jack

Quickly know the function well
1,Turn on Bluetooth Speaker:

2,Turn on the power switch, indicator light will be blue,it indicates speaker re-connecting the

Bluetooth equipment matched on the last time.Bluetooth indicator light flash quickly is searching

new Bluetooth equipment,

Picture3

3.Turn on bluetooth equipment to search and connect. For first time use, please enter passport

0000 (high versions may do not need passport,can connect directly),When well connected,the

indicator light will flash slowly and have indicating sound.

Picture4

● Tur no the speaker will have a “tinkle” warning sound ,at this state,speaker indicator light is

flashing slowly ,3 seconds later ,speaker will have “honk” warning sound ,blue in dicator light

becomes to quickly flash,it indicates Bluetooth is under searching status.

●

Turn on telephone bluetooth setting to enter searching status (different brand telephones will

have different methods to tirn on bluetooth setting) searching result will display

“MIRCOBOOM”,use the passport “0000" (4 zeros),then confirmed well connected to the

speaker bluetooth,the speaker will have warning sound ,it indicates well connected between

bluetooth speaker and telephone.30 seconds for whole operation(difference in different brand

telephones)First time it is necessary to use passport for identification of telephone and speaker,

for the second time,no need passport just click “HJXAJ-65" to connect.

● After well connected,play music from telephone,then use bluetooth buttons to operate

● Adjust the volume button to suitable level

●

Answer call:When call coming from telephone,short press “ directly can answer

“

.To make

sure call quality ,it should keep bluetooth within 50 CM distance,press””directly to hang up

call.

Please refer to telephone operation directions

Due to many bluetooth versions about laptops,connected methods willbedif ferent.If can

not connect for the time,it should be in stored new version bluetooth drive in the laptops.

Please confirm the bluetooth is under searching status,bluetooth equipment of connected device has already

turned on

Please check if the volume switch turned off, please also check input of the connected device is bluetooth

input volume is common

Please charge the speaker

●

When the power is weak,it will have “tinkle” warning sound in every20 seconds.

●

When battery built-in speaker is totally used up,it will enter to pretection state.,at

this time,it can not be used under charging,please full charge before use it

●

When do not use speaker, please push the switch to “OFF” , in case to power

consumption.