Metalligence Technology Corp. HWM6505-DW Benutzerhandbuch

 
 
 
 
HWM6505-DW is a door window sensor with ZigBee RF communication. The

 

home 

security system is built by a Zigbee networks to combine components as controller panel, 
sensors, sirens, keyfob, and keypad. It detects open or close status of door or window, 
and informs system controller by ZigBee. HWM6505-DW ascertains open/close status by 
a magnet part, when the magnet is close to sensor, it means close; it shows open when 
the magnet moves away. 
 

  Small size for easy furnishing 
  Long-life 3V lithium battery operated 
  Outstanding communication range 
  Tamper switch avoids physical attack 
 

ZigBee RF Characteristic 
  RF Protocol: IEEE 802.15.4 
  RF frequency: 2405MHz~2480MHz 
  Channel Bandwidth: 5MHz 
  ZigBee Encryption: AES 128bits 
 
Dimension 
  L41.5 x W11 mm 
 
Temperature 
  Operating: -10ºC ~ 50ºC (32ºF ~ 132ºF) 
  Storage: -10ºC ~ 60ºC (-4ºF ~ 158ºF) 
 
Operating Humidity 
  10% ~ 85% Non-Condensing 
 
Compliance 
  FCC subpart 15B and subpart 15C 
  UL/cUL 
 
 
 
 
 
 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one of the following measures: 
  Reorient or relocate the receiving antenna. 
  Increase the separation between the equipment and receiver. 
  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

  Consult the dealer or an experienced radio/TV technician for help. 
 
FCC Caution: Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate this equipment. 
 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation. 
 
This device and its antenna(s) must not be co-located or operation in conjunction with any 
other antenna or transmitter. 
 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 
20cm between the radiator & your body. 
 

This module is intended for OEM integrator only and limited to inserted to similar host 
device (Brand: Metalligence and Model: HWS6505-DW) which is battery powered host 
devices and has a plastic housing without any metal shielding. The OEM integrator is still 
responsible for the FCC compliance requirement of the end product, which integrates this 
module. 
 
20cm minimum distance has to be able to be maintained between the antenna and the 
users for the host this module is integrated into. Under such configuration, the FCC 
radiation exposure limits set forth for an population/uncontrolled environment can be 
satisfied. 
 
Any changes or modifications not expressly approved by the manufacturer could void the 
user's authority to operate this equipment.