ATI Electronics Co. Ltd SP434 Benutzerhandbuch

4. When the battery is fully charged, the red indicator light 

will turn off. Disconnect the charger from the speaker 

and the outlet. The speaker is ready for use.

Note: Overcharging could reduce the life of the battery. A 

charged battery will lose its capacity if it is not used 

on a regular basis.

Ensure that the battery is fully charged if the speaker is not 

used for a long period of time. To avoid a complete 

discharge of the battery, charge the speaker at least every 

6 months.
Battery Notes

• When the battery power is low, the speaker will beep 

every 30 seconds.

Sweden, and United Kingdom and within EFTA in 

Iceland, Norway and Switzerland.

Location of Controls
①

 Microphone

②

 Power/ Play/Pause/Answer

③

 Indicator LED/Siri

④

 Charging Port

⑤

 Auxiliary Port

The BS-KI48 Speaker has a built-in, rechargeable 

lithium-polymer battery. To avoid damage, do not attempt to 

remove the battery. The full performance of the battery is 

achieved after two or three charging-discharging cycles. 

Charge the battery fully before first use.
1. Connect the USB cable to the speaker.

2. Connect to the correct outlet (wall, computer).

3. When the charger is connected to the speaker, the red 

indicator light will turn on.

Note: Charging the battery fully may take up to 2 hours. 

- Increase the separation between the equipment and 

receiver.

- Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician 

for help.

1. This device may not cause harmful interference.

2. This device must accept any interference received, 

including interference that may cause undesired 

operation.

Note: The manufacturer is not responsible for ANY 

interference, for example RADIO or TV interference, 

caused by unauthorized modifications to this 

equipment. Such modifications could void the user's 

authority to operate the equipment. This product is CE 

certified according to the provision of the R&TTE 

Directive (99/5/EC). This declares that this product is 

in compliance with the essential requirements and 

other relevant provisions of Directive 1999/5/EC. 

Please note that this product uses radio frequency 

bands not harmonized within EU. Within the EU this 

product is intended for use in Austria, Belgium, 

Denmark, Finland, France, Germany, Greece, Ireland, 

Italy, Luxembourg, the Netherlands, Portugal, Spain,

This device complies with the part 15 of the FCC rules. 

Operation is subject to the following two conditions: (1) this 

device may not cause harmful interference, and (2) this 

device must accept any interference received, including 

interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved 

by the party responsible for compliance could void 

the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful 

interference in a residential installation. This 

equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there 

is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause 

harmful interference to radio or television reception, 

which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the 

interference by one or more of the following 

measures:

- Reorient or relocate the receiving antenna.

• BS-KI48 Bluetooth® Speaker

• USB Charging Cable

• User Manual
Safety Precautions

• Please read this User Manual carefully and follow all 

instructions.

• To avoid damage or malfunction of the speaker do not 

drop it from high locations and/or on to hard surfaces, do 

not place heavy objects on it.

• Keep speaker away from humidity, water and other liquids. 

If it does get wet, do not operate as this may cause an 

electrical shock, explosion and damage to the device or to 

the user.

• Do not place or keep this product near heat sources, such 

as direct sunlight, radiators, stoves or any other apparatus 

that produces heat. This may cause an explosion, degrade 

the performance and/or reduce battery life.

• Do not modify, repair or disassemble device (especially the 

battery). Doing so will void the warranty. The battery in 

this device may present a risk of fire or chemical burns if 

misused or tampered with.

• Use only supplied and manufacturer-approved chargers 

and unplug this device when not in use for long periods of 

time or during lightning storms.

Thank you for purchasing the Vivitar® BS-KI48 Bluetooth® 

Speaker. 
Introduction

With this speaker, you will enjoy listening to high quality 

music wirelessly using Bluetooth® technology. Easily 

connect to any mobile device for both conversation and 

music listening. It also pairs with other Bluetooth-en-

abled devices (Bluetooth V4.2+EDR specification and 

HSP, HFP, A2DP and AVRCP profiles).
Specifications

• Bluetooth Specification: V4.2

• Operation Frequency: 2.402-2.48GHz

• Supported Profile: HSP, HFP, A2DP, AVRCP

• Operation Range: Up to 33 feet(10 meters) 

• Play Time: About 6 hours

• Battery Type: 400mAh, 3.7V, Polymer Lithium Ion 

Battery

• Charge Time: About 2 Hours

① ②③④⑤