Itron Inc. OW1 Benutzerhandbuch

6

Key E2

7

LTE

8

WiFi

9

Vcc USB

10

ACT Ready

11

HDD

12

Vcc 3.3V

13

Vcc 5V

System LED

The Socket Based Router contains two System LEDs: one internal to the router and one
located externally on the bottom left corner of the router box. The external LED provides a
view of the router status without the need to open the router box. The states of the external
LED mirror the states of the internal LED. The possible SYSLED states are

• Blink Red: C12.22 relay started, trying to establish a TCP connection to the CE

• Blink Green: TCP communication OK, registration with CE in progress

• Green: Registered with CE
• Red: Error (No CE communication, no backhaul, no RFLAN module…

Battery LED

The Socket Based Router contains two battery LEDs; one for each battery. If the Socket
Based Router is configured with either one or two batteries, the LED states are:

• Green: OK
• Alternate Green/Red (blink): Battery below warning capacity threshold
• Red: Battery below critical capacity threshold

If the Socket Based Router is configured with:

• only one battery the LED for the second battery LED will be in the off state.
• two batteries and one is missing, the corresponding LED will be in the red state

Events

All generated events are managed by the local syslog. This behavior cannot be changed. A
configuration item allows the events to duplicated and sent to a remote server:
syslog_server

Alarms

Operation

TDC-xxxx-xxx DRAFT

28