Appro Technology Inc RF1 Benutzerhandbuch
Camera Positioning
Step 1
Place the camera on a non-slip surface.
Step 2
Remove the cover.
Step 3
Adjust the Viewing Angle of the 3-axis Mechanism by turning the lens module left and right until the
desired position is achieved.
Step 4
Turn the lens up and down until the desired position is achieved.
Step 5
Turn the lens to adjust the IP camera’s image until the desired orientation is achieved.
Step 6
Seat the cover.
Step 7
Insert the weatherproof rubber screw coverings over the screws ensuring a tight seal.
11