Polycom 1465-52748-040 Benutzerhandbuch
Integrator’s Reference Manual for the Polycom RealPresence Group Series
8
Polycom, Inc.
Connecting a Polycom EagleEye III Camera to a Polycom RealPresence
Group 700 system:
Option 2
• A—Two
• B—Coaxial analog video cables.
• C—DB-9 serial cable.
• Power supply. Power supply is only required if you want to use the IR
• C—DB-9 serial cable.
• Power supply. Power supply is only required if you want to use the IR
remote to wake the system when it is in sleep mode on RealPresence
Group 700 systems. Use only the approved power supply from Polycom
(part number 1465-52748-040). Do not exceed 12 Volts at 3 Amps. Verify
the polarity of the power supply as shown on the Polycom camera next to
Group 700 systems. Use only the approved power supply from Polycom
(part number 1465-52748-040). Do not exceed 12 Volts at 3 Amps. Verify
the polarity of the power supply as shown on the Polycom camera next to
the power supply input.
2
4
1 2
3
3
1
2
100-240VAC 50/60Hz 2.3A
DC IN 12V
Use Polycom Power Supply Only
Part Number: 1465-52748-040
1
Polycom recommends this configuration when a custom cable length is
required. The BNC and serial cables can be built to custom lengths.