Blwave Electronics Co. Ltd. VE821 Benutzerhandbuch

 

4

※

1. Entering Dormant Status   

Press down “TALK” button for several seconds till the indicator flashes 3 times 

quickly and then goes out. Now the headset is in dormant status, which may prolong 
headset’s standby time efficiently. 

 

2. Activating the headset from dormant status 

Press down “TALK” button for a few seconds, till the indicator flashes several 

times and remains the twinkle frequency of 3 seconds/time; at this point, matching of 
the headset and the cell phone is restored. 
Note: 1. Re-matching the headset and the cell phone is required after electric 

※

After resetting headset to original defaults set by the manufacturer, all existing 

matching settings will be deleted.   
1．Make sure the headset is in “Off” status. 
2．Charge up the headset for several seconds. 
3．The headset has been turned off, and original defaults set by the manufacturer 

have been restored and all existing matching settings have been deleted.   

 
※

7.Status Description 

◆

Blue light goes out: the headset is in dormant or in “Off” status. 

◆

The blue light flashes at 3 seconds/time: in standby status. 

◆

The blue light keeps bright: in matching-up status. 

※

8. Time of Charging/Service/Standby 

1 Standard charging time   

The first-time fully charging battery normally needs 1 hour, after that, the 

indicator goes out. Pull out the charger from AC socket and the headset, re-match 
the headset and the cell phone----please refer to “Matching Up (Headset and Cell 
Phone)”.  

2 Service and standby time 

The fully charged battery can incessantly serve for up to 5 hours (continuous 

talk) and stand by for at best 100 hours. The headset will stay in standby mode 
when there is no incoming.     

3 Low-battery statuses 
When the headset being turned on but in low battery, sequential 5 “toot” will be heard 
every 20 seconds, which reminds you to recharge the battery