GSOU Technology Co. LTD BTH1 Benutzerhandbuch
Gsou H1 Smart speaker
Thanks for purchasing the H1 Smart speaker.
Please take the time to follow the instructions in this User manual
carefully. If you have any queries, please call our national service hotline:
400-0985-400
Please take the time to follow the instructions in this User manual
carefully. If you have any queries, please call our national service hotline:
400-0985-400
1. To reduce the risk of fire or electric shock, be sure the electrical circuits
are not overloaded.
2. To reduce the risk of electronic shock, be sure not plug the adapter with
wet hands.
3.Unplug the power cable if your device is smoking or abnormal and seek
professional help from your nearest service center, be sure not detach the
device yourself.
4.To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture. Liquids can cause a failure and/or a fire hazard.
5. In order to prevent a short circuit, the power cable and audio cable
should not be twisted or dragged in case of short circuit.
6.Do not place the speaker near any open flame sources, such as lighted
candles.
7. The safety temperature of Lithium Battery should not exceed 80℃.
8. Please avoid strong shock and vibration to the screen, do not put
pressure on the display surface.
are not overloaded.
2. To reduce the risk of electronic shock, be sure not plug the adapter with
wet hands.
3.Unplug the power cable if your device is smoking or abnormal and seek
professional help from your nearest service center, be sure not detach the
device yourself.
4.To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture. Liquids can cause a failure and/or a fire hazard.
5. In order to prevent a short circuit, the power cable and audio cable
should not be twisted or dragged in case of short circuit.
6.Do not place the speaker near any open flame sources, such as lighted
candles.
7. The safety temperature of Lithium Battery should not exceed 80℃.
8. Please avoid strong shock and vibration to the screen, do not put
pressure on the display surface.
Warnings and Cautions
Charging
1. Connect the USB charging cable to the USB port of computer or 5
voltage charger for charging.(Note：Please use high quality USB charger to
avoid sound abnormal or damage for the battery or speaker itself.)
2. The battery indicator on the display will be steadily on during the
charging,and it will goes out after fully charged. The charging time will be
about 4 to 5 hours, and would be influenced by different charger.
3. Low Battery Indicator:The low battery indicator will be flash when the
battery voltage lower than 3.3-3.4V.
1. Connect the USB charging cable to the USB port of computer or 5
voltage charger for charging.(Note：Please use high quality USB charger to
avoid sound abnormal or damage for the battery or speaker itself.)
2. The battery indicator on the display will be steadily on during the
charging,and it will goes out after fully charged. The charging time will be
about 4 to 5 hours, and would be influenced by different charger.
3. Low Battery Indicator:The low battery indicator will be flash when the
battery voltage lower than 3.3-3.4V.
Connecting
1. Please turn on the bluetooth device and H1 speaker, searching Gsou H3
and connect.( if need password in case, please try 0000);
2. Turn the music player on your device to play music.
1. Please turn on the bluetooth device and H1 speaker, searching Gsou H3
and connect.( if need password in case, please try 0000);
2. Turn the music player on your device to play music.
FM
1. Short press into FM mode
2. press more than 2 seconds, the speaker will search the FM station
automatically (FM Frequency: 7.5MHZ-108MHZ), Short press
Play/Pause switching to time setting mode.
1. Short press into FM mode
2. press more than 2 seconds, the speaker will search the FM station
automatically (FM Frequency: 7.5MHZ-108MHZ), Short press
Play/Pause switching to time setting mode.
Time setting
1. Long press switching to time setting mode,then clock images will be
flashing on the display (Tips: the time setting mode will be shut down
automatically if there is no any operation within 8 seconds);
2. Press+/- for setting Hours;
3. Short press again can set the Minutes, then Minutes images part
will be flashing, press +/- to set the Minutes;
4. Short press again to confirm the setting and exit.
1. Long press switching to time setting mode,then clock images will be
flashing on the display (Tips: the time setting mode will be shut down
automatically if there is no any operation within 8 seconds);
2. Press+/- for setting Hours;
3. Short press again can set the Minutes, then Minutes images part
will be flashing, press +/- to set the Minutes;
4. Short press again to confirm the setting and exit.
Alarm setting mode (Press any key can shut down the alarm clock when
the alarm rings).
1. Long press button switching to alarm setting mode (Tips: Non
working under FM mode); the alarm setting mode will be shut down
automatically if there is no any operation within 8 seconds);
2. Short press +/- button, then select ON to turn on the alarm clock (select
OFF for turning off alarm);
3. Short press button switching to alarm clock ‘Hour’ setting mode.
Then the ‘Hour’ images will be flashing on the screen.Press +/- for setting
time.;
4. Short press button switching to alarm clock ‘Minutes’ setting mode.
Then the ‘Minutes’ images will be flashing on the screen.Press +/- for
setting time;
5. Press button again to confirm the settings and exit;
6. The alarm clock will be work even although the speaker was already
turn off.
the alarm rings).
1. Long press button switching to alarm setting mode (Tips: Non
working under FM mode); the alarm setting mode will be shut down
automatically if there is no any operation within 8 seconds);
2. Short press +/- button, then select ON to turn on the alarm clock (select
OFF for turning off alarm);
3. Short press button switching to alarm clock ‘Hour’ setting mode.
Then the ‘Hour’ images will be flashing on the screen.Press +/- for setting
time.;
4. Short press button switching to alarm clock ‘Minutes’ setting mode.
Then the ‘Minutes’ images will be flashing on the screen.Press +/- for
setting time;
5. Press button again to confirm the settings and exit;
6. The alarm clock will be work even although the speaker was already
turn off.
The Gsou trademark and logo are registered trademarks of Gsou Technology
(Shenzhen)Co.,Ltd. All Rights Reserved. All other trademarks, logos or service
marks are the property of their respective owners.
Driver spec：
Size：
Net weight：
RMS：
Frequency response：
Sensitivity：
S/N ratio：
Distortion：
Working distance：
Transmission Power：
Bluetooth profiles：
Size：
Net weight：
RMS：
Frequency response：
Sensitivity：
S/N ratio：
Distortion：
Working distance：
Transmission Power：
Bluetooth profiles：
Frequency range：
Working current：
Working voltage：
Charging voltage：
Charging current：
Working current：
Working voltage：
Charging voltage：
Charging current：
Φ50mm 4Ω/ 5W
90x90x36mm
130.0g
3W
100HZ-20KHZ
-87dBm@0.1%BER
≥80 db
≤0.4% @1W
about 33 feet
Class2 -6dbm~+4dbm
A2DP,AVRCP,HFP,SPP,BAS,DIS,
FMP,HRP,HRS,HTP,HTS,IAS,LLS
2.400-2.480GHz 79ch
≤600mA
3.7V
DC 5V
500-600MA
Operation Instruction
Standard Accessories
Specifications
Structure Introduction
Gsou Technology (Shenzhen)Co.,LTD
Add:14c, Block A, First World plaza, No.7002 West Hongli Road,
Futian District, Shenzhen, China.
Tel: 0086-755-8326 6570 Fax:0086-755-8325 5400
E-mail: sales@gsou.cn
Website: www.gsoutech.com
Add:14c, Block A, First World plaza, No.7002 West Hongli Road,
Futian District, Shenzhen, China.
Tel: 0086-755-8326 6570 Fax:0086-755-8325 5400
E-mail: sales@gsou.cn
Website: www.gsoutech.com
Contact Us
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit differentfrom that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit differentfrom that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Warnings
Power button: press longer than 2 seconds to turn on/off;
Play/pause button:
Mode switch button: short press to switch between modes.
Short press to receive incoming call, press again to hang up. Long
press it to reject calls, later enter into bluetooth pairing status;
Soundtracks/ Volume control: short press for next track and long
press for volume up;
Soundtracks/ Volume control: short press for previous track and
long press for volume down;
Play/pause button:
Mode switch button: short press to switch between modes.
Short press to receive incoming call, press again to hang up. Long
press it to reject calls, later enter into bluetooth pairing status;
Soundtracks/ Volume control: short press for next track and long
press for volume up;
Soundtracks/ Volume control: short press for previous track and
long press for volume down;
short press is for adjusting the lightness of display
screen(there are 3 types choice).long press is for adjusting
the time.long press +/- for set clock.
DC-IN micro-USB Port:
1.Connect the USB cable with PC or adaptor for charging；
2.USB Connect USB cable with PC USB Port, TF card is
readable when speaker is off;
3.Connect USB cable with PC USB Port, press M button to
switch the mode for playing music when speaker is on;
Insert the audio cable into the AUX-in jack. The speaker will
disconnect the Bluetooth automatically.
Microphone: enabling hands-free communication.
screen(there are 3 types choice).long press is for adjusting
the time.long press +/- for set clock.
DC-IN micro-USB Port:
1.Connect the USB cable with PC or adaptor for charging；
2.USB Connect USB cable with PC USB Port, TF card is
readable when speaker is off;
3.Connect USB cable with PC USB Port, press M button to
switch the mode for playing music when speaker is on;
Insert the audio cable into the AUX-in jack. The speaker will
disconnect the Bluetooth automatically.
Microphone: enabling hands-free communication.