Shanghai Huace Navigation Technology LTD. A02025 Benutzerhandbuch
14
3 Setting Up the Receiver
This chapter describes best practices for setting up the equipment, and outline the
precautions that you must take to protect the equipment. It also describes the typical
installation diagram of reference station composed of P3DT GNSS receiver, GNSS
antenna, external power and network cable.
precautions that you must take to protect the equipment. It also describes the typical
installation diagram of reference station composed of P3DT GNSS receiver, GNSS
antenna, external power and network cable.
3.1 System Installation
3.1.1 Supported Antenna
The receiver provides two TNC-type female connectors for connecting to antenna.
The receiver is intended for use with two CHC Geodetic GNSS antennas.
The receiver is intended for use with two CHC Geodetic GNSS antennas.
CHC A220GR GNSS
Geodetic Antenna
Other GNSS antennas may however be used ensuring that the antenna receive the
proper GNSS frequencies and operates at either 3.3V or 7.1V with a signal greater
than 40 dB at the antenna port.
proper GNSS frequencies and operates at either 3.3V or 7.1V with a signal greater
than 40 dB at the antenna port.
3.1.2 System Installation Diagram
The typical installation diagram of the CHC P3DT GNSS receiver connected with CHC
A220GR GNSS Geodetic Antenna, external power supply and network cable.
A220GR GNSS Geodetic Antenna, external power supply and network cable.