Shanghai Huace Navigation Technology LTD. A02025 Benutzerhandbuch
19
Protocol select APIS, input Address, Port and Base ID (CHC receivers recommend to
be base station), click set firstly and click get to check whether the setting is saved.
After setting successfully, correction LED will be on.
be base station), click set firstly and click get to check whether the setting is saved.
After setting successfully, correction LED will be on.
4.2 Configure P3DT using Winflash
Install WinFlash on your PC
Connect the P3DT to your PC using the GPS to PC Data cable by COM2 or
Bluetooth
Bluetooth
4.2.1 Receiver Firmware Upgrade
Start the WinFlash utility. The Device Configuration screen appears.
From the PC serial port field, select the serial (COM2) port on the computer that the
receiver is connected to Click Next.
receiver is connected to Click Next.