Shanghai Huace Navigation Technology LTD. A02025 Benutzerhandbuch
25
Data Output Configuration
4.4 Connect P3DT using GNSSTool
Turn on the receiver → Launch GNSSTool → press config on the bottom of the screen
→ choose Connect.
→ choose Connect.
In the Connect screen, set Device Type as GNSS RTK, Connection Type as Bluetooth.
Tap Target Bluetooth at the third row, press Bluetooth icon at right top of the screen
and connect to the receiver’s Bluetooth whose name is the GNSS-XXXXXXX (the SN of
the current receiver, PIN is 1234).
and connect to the receiver’s Bluetooth whose name is the GNSS-XXXXXXX (the SN of
the current receiver, PIN is 1234).
One step back, choose paired Bluetooth device with the receiver’s SN. Press Connect
on the lower right of the screen.
on the lower right of the screen.