Shanghai Huace Navigation Technology LTD. A02025 Benutzerhandbuch
A Communication Ports Definition
31
The receiver does
not turn on.
not turn on.
Power is too low. Check the charge on the external battery
and, if applicable, check the fuse.
External power
is not properly
connected.
is not properly
connected.
Check that the Lemo connector is seated
correctly and that the cable is secured to
the receiver.
correctly and that the cable is secured to
the receiver.
Check for broken or bent pins in the
connector.
connector.
Faulty power
cable.
cable.
Check that you are using the correct cable
for the connection between Lemo port and
power supply.
for the connection between Lemo port and
power supply.
Check that the correct external power
supply is connected to a particular Lemo
port.
supply is connected to a particular Lemo
port.
Check pinouts with a multimeter to ensure
internal wiring is intact.
internal wiring is intact.
The receiver is not
responding.
responding.
Receiver needs a
soft reset.
soft reset.
Turn off the receiver and then turn it back
on again.
on again.
The receiver is not
receiving satellite
receiving satellite
signals
The GNSS
antenna cable is
loose.
antenna cable is
loose.
Make sure that the GNSS antenna cable is
tightly seated in the antenna connector on
the GNSS antenna.
tightly seated in the antenna connector on
the GNSS antenna.
The cable is
damaged.
damaged.
Check the cable for any signs of damage. A
damaged cable can inhibit signal detection
from the antenna at the receiver.
damaged cable can inhibit signal detection
from the antenna at the receiver.
The GNSS
antenna is not in
clear line of sight
to the sky.
antenna is not in
clear line of sight
to the sky.
Make sure that the GNSS antenna is located
with a clear view of the sky.
with a clear view of the sky.
Restart the receiver as a last resort (turn off
and then turn it on again).
and then turn it on again).