Homewerks Worldwide LLC 7130-02-BT Benutzerhandbuch

10

www.homewerksww.com

1. To play your personal music files, you need a wireless BLUETOOTH

®

 device.

2. Set your device to a midrange volume before connecting to the speaker.
3.   Follow the instructions that came with your BLUETOOTH

®

 device to make it discoverable or to set it 

to search for other BLUETOOTH

®

 accessories. This may involve entering a passkey or PIN (Personal 

Identification Number).

4.  From the Home screen, choose Settings > BLUETOOTH

®

, the device searches for Homewerks

®

 

speaker.

Note: While your device can maintain multiple pairing records, it can only connect to one accessory 
at a time. This prevents your device from sending your data to the wrong BLUETOOTH

®

 accessory.

5. Choose the Homewerks

®

 speaker, and then enter a passkey or PIN (0000) if prompted.

6. When pairing is complete, you can use the BLUETOOTH

®

 speaker to play audio with your device.

7.  Optimal volume setting for the BLUETOOTH

®

 speaker is 70% or lower. Settings higher than 70% 

may cause sound distortion.

This is a one-time pairing to be done after turning on the power source. 
1.  Turn switch to on ON. The white LED light on the fan should be on.  NOTE: the other functions on 

the light switch will not be working until the end of this section.

2. Cycle the switch ON & OFF 4 times until the Blue LED night light on the fan is flashing.
3.  While the Blue LED night light is flashing, press any of the top three setting buttons on the switch – 

NIGHT LIGHT, LIGHT or FAN.

4.  Blue LED night light will stop flashing.  The switch is now paired with fan. All four setting buttons  

on the switch should now be functional. 

5.  Any combination of settings can be achieved by individually pressing each setting button, except 

LED light and night light. 

EG: LIGHT and FAN will turn on the exhaust fan and LED light. 
EG: LIGHT and MUSIC will turn on LED light and Bluetooth speaker.
Should you ever lose pairing between the switch and fan, repeat steps 2-4. 

2.   Attach grille by pinching mounting springs 

and insert into narrow rectangular slots in 
the fan housing. 
 
Turn on power source.