L-3 Communications Aydin Corporation 6000-8501900 Benutzerhandbuch
• P
AGE
31
APPENDIX A
ESTABLISHING A GPRS CONNECTION
Setting Up and Establishing a GPRS
Connection (Windows 98)
GPRS service can only be used on subscriber
units that have GPRS software installed.
Initial Setup of the Terminal
1. Turn off the Subscriber Unit.
2. Install a valid SIM, if not already installed.
2. Install a valid SIM, if not already installed.
The SIM must have GPRS operation
enabled.
3. Connect the serial port of the PC to the serial
port of the GSM Terminal (9-pin “D” connector)
using straight-through serial cable.
4. Power up the GSM Terminal. Wait for LED#3 to
blink amber/green. LED#2 will be off and LED#1
will indicate the power supply status as in table 1.
Modem Installation
1. Start the Control Panel program by selecting
Start->Settings->Control Panel
1. Double-click “Modems”. Click the “General”
tab. Click “Add”
A
PPENDIX
A - E
STABLISHING
A
GPRS C
ONNECTION