ads-tec GmbH RAX1X2X Benutzerhandbuch
User Manual
User Manual
User Manual
User Manual Access Point /Client
Access Point /Client
Access Point /Client
Access Point /Client V 3.0.3
V 3.0.3
V 3.0.3
V 3.0.3
102
102
102
102
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
P
ING
T
EST
The Ping test can be used to test whether a particular remote station is reachable across the
network. The test will send the an Echo-Request packet to the target address and analyses
the data received as reply.
network. The test will send the an Echo-Request packet to the target address and analyses
the data received as reply.
Specify the remote station to be checked by entering its IP address in the corresponding
field. Additionally, the number of packets to send needs to be specified. It is limited to a
maximum of 10 packets.
field. Additionally, the number of packets to send needs to be specified. It is limited to a
maximum of 10 packets.
Clicking Activate will start the Ping Test.
After a short time, an overview showing the course and the result of the Ping Test will
appear. The overview shows the status of all packets that were sent and received.
appear. The overview shows the status of all packets that were sent and received.
Click Next to end the Ping Test.