TP-Link Technologies Co. Ltd. C20I Benutzerhandbuch

 

- 45 - 

1.  Enter the appropriate MAC Address into the MAC Address field. The format of the MAC 

Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). For example: 

00:0A:EB:B0:00:0B.  

2.  Give a simple description for the wireless station in the Description field. For example: 

Wireless station A. 

3. Select 

Enabled or Disabled for this entry on the Status drop-down list. 

4. Click 

the 

Save button to save this entry. 

1. Click 

the 

Edit in the entry you want to modify. If you want to delete the entry, click the Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable Selected button to make selected entries enabled 

Click the Disable Selected button to make selected entries disabled. 

Click the Delete Selected button to delete selected l entries. 

For example: If you desire that the wireless station A with MAC address 00:0A:EB:B0:00:0B and 

the wireless station B with MAC address 00:0A:EB:00:07:5F are able to access the router, but all 

the other wireless stations cannot access the router, you can configure the Wireless MAC Address 

Filtering list by following these steps: 

1. Click 

the 

Enable button to enable this function. 

2.  Select the radio button “Allow the entries specified by any enabled entries in the list to 

access” for Filtering Rules. 

3.  Delete all or disable all entries if there are any entries already. 

4. Click 

the Add New button.  

1)  Enter the MAC address 00:0A:EB:B0:00:0B /00:0A:EB:00:07:5F in the MAC Address 

field. 

2)  Enter wireless station A/B in the Description field. 

3) Select 

Enabled in the Status drop-down list. 

4) Click 

the 

Save button. 

The filtering rules that configured should be similar to the following list: