Orange Electronic CO. LTD P420 Benutzerhandbuch
Manual for Tire Pressure Monitoring Systems, TPMS
3/21
Reacting to Alerts
When an alert or warning is received, reduce vehicle’s speed and proceed to a safe location to
stop where the tire can be inspected and /or serviced.
The low-pressure alert indicates that the air pressure has dropped to a selected minimum and a
high-temperature alert indicates that the temperature of the tire content has surpassed the
threshold value set.
Use of Chemicals
Temporary resealing or re-inflation products containing internal sealants or propellants in any tire
assembly may adversely affect the operation of the sensor/transmitter.
When an alert or warning is received, reduce vehicle’s speed and proceed to a safe location to
stop where the tire can be inspected and /or serviced.
The low-pressure alert indicates that the air pressure has dropped to a selected minimum and a
high-temperature alert indicates that the temperature of the tire content has surpassed the
threshold value set.
Use of Chemicals
Temporary resealing or re-inflation products containing internal sealants or propellants in any tire
assembly may adversely affect the operation of the sensor/transmitter.
Specifications of TPMS
RECEIVER SPECIFICATIONS
Operating voltage
12V DC
Operating current
< 200mA
Monitored temperature range
-30
o
C to 75
o
C
Operating temperature
-25
o
C to 75
o
C
SENSOR AND TRANSMITTER SPECIFICATIONS
Storage temperature
-40
o
C to 125
o
C
Operating temperature
-30
o
C to 110
o
C
Operating humidity
Max 95%
Operating frequency
433.92MHz ±50kHz
Pressure monitoring range
0~74 psi
Pressure reading accuracy
At Normal condition
± 1psi at normal pressure range
± 1psi at normal pressure range
Temperature reading accuracy
± 4
o
C in normal environmental condition
Transmission power
Max 75 d
Bm
Battery
3V
Sensor weight
27g ±3 g
System Installation
There are two parts of system installation
1. Setting up the display unit in the vehicle
2. Installing the transmitter unit sensor in each tire.
We strongly suggest installing the display unit first, and then install the tire transmitters.
1. Setting up the display unit in the vehicle
2. Installing the transmitter unit sensor in each tire.
We strongly suggest installing the display unit first, and then install the tire transmitters.
Note: Warranty does not cover “Tire Valves” and “Screws for Tire Valves”, all the tire valves and
the screws will need to be replaced with new tire valves and screws when rotating tires, changing
of tires, and changing of Wireless Transmitter sensors. (Whenever a wireless transmitter sensor
is installed or reinstalled, a new tire valve” and “screws for the tire valve” must be used).
the screws will need to be replaced with new tire valves and screws when rotating tires, changing
of tires, and changing of Wireless Transmitter sensors. (Whenever a wireless transmitter sensor
is installed or reinstalled, a new tire valve” and “screws for the tire valve” must be used).
Accessories for Tire Pressure Monitoring System
NO.
Accessory Name
Quantity
A
Wireless Receiver and Display Unit
1
B
Velcro for Display
2
C
Power Connection for Cigarette Lighter
1
D
Wireless Transmitter Sensor (Remote Sensing
Module)
Module)
4
E
Tire Valves
4