Cheung Hung Electronics Ltd. CH-W808 Benutzerhandbuch

FUNCTION

ROOM
MONITOR

PHONE BOOK

~ 22 ~

Displaying :

DOW

FUNCTION SETTING INSTRUCTION

PHONE BOOK

FUNCTION

NONDISTURB

SELECT
ON/OFF

SET NUMBER

PHONE BOOK
5128888

SETNUMBER

SELECT
ON/OFF

SELECT

ON / OFF

BABY CALL

Displaying :

1.At standby mode, press to enter menu setting

2.Press or to select "FUNCTION"

3.Press to confirm and LCD screen displays

NONDISTURB

4.Press or to select

BABY CALL

5.Press to confirm and LCD screen displays

SELECT

ON/OFF

6.Press to select

SET NUMBER

7.Press to confirm and "-" icon will flash

8.Input the telephone number for monitor, e.g.: 5128888

9.Press to confirm, after a crisp tone "BI" heard, it
indicates the setting succeed

11.Press or to select ON/OFF

12.Press to confirm, after a crisp tone "BI" heard, it indicates the setting succeed, press

END to exit

>In case of the BABY CALL function is programmed as ON state, any key

( excluded) if pressed will dial out directly the programmed baby call number

>How to delete

BABY CALL: repeate operation on step 1~5, press to confirm ,

and press to select " SELECT OFF", press to confirm the delete, press

to exit

10.Press to select "SELECT ON/OFF", press to
confirm

DOW

BABY C

ALL SETTING

FUNCTION SETTING INSTRUCTION

ROOM MONITOR

Notice: the Room Monitor function can be effective only based on 2 or more handsets per-
-formed, one is for Detecting (for listening), e.g. handset 1, the others are for
monitoring (for search),e.g. handset 2 or 3.

How to operate Room Monitor function

>At standby mode, press on handset

>Press or to select "FUNCTION" menu

>Press till LCD displays "NONDISTURB", press
till display

1.Program on Detector Unit (e.g. handset 1)

>Press button till LCD displays"FUNCTION ON", press

repeatedly to confirm, after a crisp tone

heard,

LCD displays

ROOM MONITOR

and is flashing.

ROOM MONITOR
_

Displaying :

>It indicates the Room Monitor function is effective, you can leave it in the room or house
for detecting while only based on the effective ranges.

2.Program on Monitoring Unit (e.g. handset 2)

>Press PAGE button on handset 2, LCD displays INTERCOM
and the icon "_"is flashing

INTERCOM
_

Displaying :

RM MODE
HANDSET I

Displaying :

>Input the expected handset code for monitoring (e.g. 2), and

then handset 2 will arise the tone of "DU"

3.The Room Monitor function is workable on handset 2, you can monitor and hear the tones
through handset 2

4.Press button on handset 2 to exit and return to standby state

5.Press button on handset 1 to remove the Room Monitor function

~ 23 ~