Acme Tech. Co. Ltd. B1045 Benutzerhandbuch

ACME TECH. (SHENZHEN) CO., LTD.                                            INSTRUCTION MANUAL 

 

- 3 -

3、Function Description： 

1)IC have a power supply switch(on/off),a trigger: control advance, 

backlash, back-draft; a direction controlling knob: control left or right 

steering; the third channel function key:CH3+,CH3-;The twelve function 

key:  －, + ,CH, SEL, DT1－, DT1+, DT2－, DT2+, DT3－, DT3+, DT4－, 

DT4+。 

2) Turn left the Steering Servo, make the motor turning left; Turn right the 

Steering Servo, make the motor turning right. Its movement scope is 

affected by the TRM_ST,SBT_ST, EPA-ST，EXP-ST，D/R-ST，SPD. When 

REV-ST is setted ‘ON’, it will make the operation reverse. Turn left the 

Steering Servo, make the motor turning right; Turn right the Steering Servo, 

make the motor turning left. 

3) Pull the throttle, make the motor forward; Push the throttle , make the 

motor back. Its movement scope is affected by the TRM_TH, SBT_TH, 

EPA-TH，EXP-TH, ACC, ABS，ATL-BK. When REV-ST is set ‘ON’, it will 

make the operation reverse. Pull the throttle, make the motor back ; Push 

the throttle , make the motor forward. 

4) When the vehicle is forward, back-draft or turning left or right, it will 

output the control signal of the channel 3.It is affected by the CH3-TR，

BMX，SBT-3C ,CH3-P1, 2, 3, 4, PR,PL. 

5) Press the ON/OFF switch right , it plays; Press the ON/OFF switch left 

and dumps, it stops all the movement.