Deliberant LLC APC2S14 Benutzerhandbuch
Quick Installation Guide
Installation
deliberant
Page 11
Step 5.
Attach mounting bracket (items M, K, E and L in the Figure 1
Contents) to the unit
and tighten the nut and bolt.
For mounting APC 2S-14 on the wall,
first attach mounting bracket to the wall and then connect the unit together and tighten
the nut and bolt.
the nut and bolt.
It is recommended not to tighten the unit to its mounting bracket until the alignment
process of the antenna is complete.
process of the antenna is complete.
Step 6.
For the pole mounting attach APC 2S-14 on pole with U bolt (items I and L in the Figure
1
1
Step 7.
Place rubber seal on the UTP cable and insert it into the enclosure’s ETH port with
rubber seal:
rubber seal:
It is recommended to use shielded STP Ethernet cable to reduce exposure of the
electromagnetic noise.