Goliath Solutions SPIDER-10-001 Benutzerhandbuch
FSM Cable Installation & MEU Activation
Page 22 of 43 Rev. 1A, Rev. Date: 8/31/2006
Use or Disclosure of this document is covered under the Non-Disclosure Agreement executed between the
prospective vendor and Goliath Solutions LLC.
Appendix D - Test Tags
Suggested Test Tag Locations for Store
Test Tag
Number
Number
Store
Location
Location
10 Aisle
Store
Store
9 Aisle
Store
Store
8 Aisle
Store
Store
Location
TT1
Front
1
1
1
Side of store, above beginning
of cosmetics.
of cosmetics.
TT2
Front
2
2
2
Middle of the B10 display in
cosmetics, on bottom lip of
display
cosmetics, on bottom lip of
display
TT3
Front
5 - 6
5 - 6
4-5
End cap
TT4
Front
8-9
7-8
6-7
End cap
TT5
Middle
1-2
1-2
1-2
End cap
TT6
Middle
5 - 6
5 - 6
4-5
End cap
TT7
Middle
8-9
7-8
6-7
End cap
TT8
Back
1-2
1-2
1-2
End cap
TT9
Back
5 - 6
5 - 6
4-5
End cap
TT10
Back
8-9
7-8
6-7
End cap
TT11
Back
Pharmacy
Pharmacy
Pharmacy
Behind signs or under counter.
Note: The store will always get 11 test tags. The test tags are normally taped to the back of
signs on the end caps in the above listed aisles. Sometimes they may be installed in a
permanent display such as the battery display.
permanent display such as the battery display.
Suggested Test Tag Locations for Stock Room
Test Tag
Number
Number
Location
SR1
Mounted on the wall next to the loading dock door. It is mounted on the side of
the door where the loading ramp is located.
the door where the loading ramp is located.
SR2 – SR7
Sequentially counter clockwise from the location of SR1 covering the
circumference of the room. Normally mounted near doors.
circumference of the room. Normally mounted near doors.
Note: The stock room will always get 7 test tags. The other 6 test tags (SR2 – SR7) are placed
in a counter clockwise sequence around the stock room. Place tags above or near
doors. Don’t place on shelves below where a liquid is stored. The test tags are
normally taped on the wall or on a wood area on a stock shelf.
doors. Don’t place on shelves below where a liquid is stored. The test tags are
normally taped on the wall or on a wood area on a stock shelf.