Leap Devices LLC JR2TX1 Benutzerhandbuch

Jr2 T

ransmitt

er

Q

uick S

tar

t Guide

Click

- Press and hold to power on/off
- Tap to test fire

The Jr2 Transmitter is the most intuitive and 
easy to use lighting control device available.

Click the dial inward to index between active 
groups.  Turn dial to adjust value when frame 
is around desired group.

When all groups are framed, all groups may be 
adjusted at the same time by the same value.

When the lock is selected, any accidental 
movement of dial will not adjust power levels.

PRESS and HOLD dial to enter menu mode.
Click dial to move between options
Rotate dial to make selection

Channel: Set RadioPopper channel 1 to 16

Stops:  Adjust by 1/3 or 1/10 stops.  In percent 
mode, this changes between 1% and 5% 
adjustment intervals.

Each group can be set to adjust by linear 
percent (similar to a JrX Transmitter dial) or 
more accurately by EV stops.

The Jr2 Transmitter includes 4 memory loca-
tions to be used to store 4 complete lighting 
setups including all values and settings.

Stored information includes the %/EV setting 
of each group, which groups are active, and 
whether the unit is set for 1/10 stop or 1/3 
stop adjustments.

The RadioPopper radio channel (1-16) is not 
stored in the memory locations.

To save your present settings to a given memory 
location, simply press and hold the group button 
(1~4) corresponding to the memory location.  
After 2 seconds the word “SAVE” will blink along 
with the chosen location.  Your settings are now 
stored.

To recall previously saved settings, press and 
hold Dial inward for 2 seconds.  While the 
“SAVE” icon is blinking, press and hold the group 
button (1~4) for 1 second corresponding to the 
memory location you wish to recall.  Your set-
tings will be recalled from the memory location.

- Toggle group on/off
- Save/Recall SAVE settings

- Press and hold for MENU
- Click to index, Rotate to set value

TR

ANSMIT

TER  Jr2