Primary Communications Inc. PMC88U118 Benutzerhandbuch

 

 
 
 
 
 
 
 
 
 
 
 
 
 
Connection ports 
Power [1]: use the provided power supply unit to connect to the power port. 
 
Line [2]: connect landline service phone cable to this port, the other end of the cable should plug-in 
to wall phone outlet. 
 
Phone [3]: connect telephone set to this port with the provided phone cable. 

 

LED signals 
POWER [4] LED: green power LED turns on when power supply is connected. 
 
BT [5] LED: the Bluetooth LED is used to indicate various mobile or landline connection status. 
 

flash green light: standby mode for pairing up registered mobile phone or for new 

registration after power is turned on for the first time. 

 
no light: the LED turns off after mobile phone is registered and ready for receiving and 

making mobile phone calls. 

 
steady green light: indicates mobile phone service is in use. 
 
steady yellow light: indicates landline service is in use. 

LINK [6] button 
The LINK [6] button is used to register Bluetooth enabled mobile phone, up to three different mobile 
phones can be registered with U118.  Auto pair-up function enables U118 to search for registered 
mobile phone in range when U118 is in standby mode. 
 
To register a Bluetooth enabled mobile phone 

1. When BT LED is in flash green light state, press on the LINK button for one second until the 

LED turns steady ON for one second, release the button and start to pair up mobile phone 
with U118 following the next two steps. 

2. Turn on and activate the Bluetooth function of your mobile phone, and search for device name 

of “U118_BT”, enter password “0000” to pair up with U118.