Advanced Card Systems Limited ACR320 Benutzerhandbuch
Document Title Here
Document Title Here
Document Title Here
ACR320 - User Manual
Version 0.10.01
Page 9 of 9
info@acs.com.hk
www.acs.com.hk
3.4. Smartcard reader
The Ticket Validator is built-in with a 13.56MHz smartcard reader. The demo application software
running at startup read cards continuously. When we present a card in front of the antenna, the demo
application software will show a corresponding message.
running at startup read cards continuously. When we present a card in front of the antenna, the demo
application software will show a corresponding message.
3.5. USB Host
The USB host port is compliant with USB 1.1 full speed. USB devices (e.g. mouse, keyboard, USB
hub, etc) can be connected to the Ticket validator via this port. For standard HID device (e.g. mouse)
or mass storage device (e.g. USB drive), no driver is needed.
hub, etc) can be connected to the Ticket validator via this port. For standard HID device (e.g. mouse)
or mass storage device (e.g. USB drive), no driver is needed.
3.6. USB Client
The USB client port is compliant with USB 2.0 high speed.
3.7. Ethernet
An Ethernet port is provided for connecting to network via RJ45 cable. By default, it uses dynamic IP
address. So, when you connect the mobile validator to a network with DHCP server, it should be able
to get the IP address automatically.
address. So, when you connect the mobile validator to a network with DHCP server, it should be able
to get the IP address automatically.
Cable can be plugged to the mobile validator before or after booting up.
3.8. 3G / GPRS
Before using the 3G/GPRS feature, a SIM card should be installed in the SIM slot before powering up
the device. The application will use the API to gain access to the 3G/GPRS.
the device. The application will use the API to gain access to the 3G/GPRS.
3.9. RS232/485
The RS232/485 signals can be accessed via the 60 pin connector.