Applied Wireless Identifications Group Inc. R27CA012 Benutzerhandbuch
MPR-2010BR
Page 5
Doc# 041318
1 INTRODUCTION
AWID's Sentinel-Sense MPR-2010BR is a long-range (12 to 15 feet) Radio Frequency
IDentification (RFID) reader with RS-232 I/O that works with most leading UHF passive
tags. This reader comes with a unique combination of long read range, small size, and
low power consumption. It has an internal power converter, allowing it to work with a
wide range of supply inputs without affecting its performance. Its primary applications
are asset management and tracking, and fleet management applications.
IDentification (RFID) reader with RS-232 I/O that works with most leading UHF passive
tags. This reader comes with a unique combination of long read range, small size, and
low power consumption. It has an internal power converter, allowing it to work with a
wide range of supply inputs without affecting its performance. Its primary applications
are asset management and tracking, and fleet management applications.
The MPR-2010BR readers are delivered with the following components and accessories:
q
MPR-2010BR, firmware version 3.xxM
q
CD containing interface document and demo SW
q
Power supply PS9-2A-SW, 50-60 Hz and 110 to 220 VAC
In order to control the MPR-2010BR reader you will need the following:
q
PC running Windows
1
98 or higher, CD-ROM drive and one RS-232 serial port.
q
Host software (AWID s demo software or your own custom software).
q
RFID Tags (EPC C1 Gen 1 & 2, ISO Type B, etc)
1.1 SPECIAL FEATURES:
·
Multi-Protocol:
EPC
C0
2
, C1
3
Gen 1 & 2, ISO Type B, EPC V1.19 Rev.2
·
Thin passive tags with long-range performance
·
High performance circular polarized antenna
·
RS-232
data
input/output
·
Splash proof design for indoor or outdoor applications
·
UV
stabilized
housing
·
1
Though MPR-2010BR can also be controlled from a non-Windows programming platform, AWID demo
and FW upgrade programs are applications to run in Windows.
2
Both 64- and 96-bit
3
Both 64- and 96-bit