Tellus Group Corp. 04021 Benutzerhandbuch
1
Copyright © 2001 by manufacturer. All rights reserved.
No part of this documentation may be reproduced in any form or by any means or used to
make any derivative work (such as translation, transformation, or adaptation) without
written permission from the copyright owner.
make any derivative work (such as translation, transformation, or adaptation) without
written permission from the copyright owner.
All the other trademarks and registered trademarks are the property of their respective
owners.
owners.
Statement of Conditions
The content described in this manual may be improved or changed at any time and it is
subject to be changed without notice.
subject to be changed without notice.
Manufacturer assumes no responsibility for errors contained herein or for direct, indirect,
special, incidental or consequential damages with the furnishing, performance, or use of
this manual or equipment supplied with it, even if manufacturer of its suppliers have been
advised of the possibility of such damages.
special, incidental or consequential damages with the furnishing, performance, or use of
this manual or equipment supplied with it, even if manufacturer of its suppliers have been
advised of the possibility of such damages.
Electronic Emission Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
two conditions:
(1) This device may not cause harmful interference.
(2) This device will accept any interference received, including interference that may
cause undesired operation.
cause undesired operation.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user need to
correct the interference at his area. If the equipment causes interference to radio or
television reception, try to correct the interference by using one or more of the following
measures:
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user need to
correct the interference at his area. If the equipment causes interference to radio or
television reception, try to correct the interference by using one or more of the following
measures:
Ÿ
Plug the equipment into an outlet that is on a different circuit from the television or
radio.
radio.
Ÿ
Change the direction of the television or radio antenna until the interference
disappears.
disappears.
Ÿ
Move the equipment to one side or the other of the television or radio.
Ÿ
Move the equipment farther away from the television or radio.
To assure continued compliance, any changes or modifications not expressly approved by
manufacturer could void the user’s authority to operate the equipment.
manufacturer could void the user’s authority to operate the equipment.