Wavenet Technology Pty Ltd. DWI800D Benutzerhandbuch

Seite von 39
Dualwave-I Modem User Manual _______________________________________________________ Specifications 
DWI10012WT31 39 
Wavenet 
Technology 
Specifications 
Physical Properties 
Weight 
Approximately 150g 
Size (L x W x H) 
136mm x 82mm x 18mm 
(excluding antenna) 
LED Indicators 
Power/On-Line indicator (Green) 
Off -  
Power off  
Slow flashing -  
Scanning 
On -  
Registered 
Low Battery Indicator (Red) 
Rapid flashing - 
Re-charge battery  
Communication Protocols 
Modem to radio network protocol 
RD-LAP 19.2 kbps  
RD-LAP 9.6 kbps 
Modem to terminal (e.g. handheld) protocol 
NCL 1.2 
PDA Port 
Compaq iPAQ 100 pin Expansion Pack 
Serial communications interface 
Transmitter 
Frequency range 
806 – 825MHz 
Channel spacing 
25 kHz for RD-LAP 19.2 kbps 
12.5 kHz for RD-LAP 9.6 kbps 
Data rate 
RDLAP 9.6kbps, 19.2kbps  
MDC 4.8kbps 
RF output power 
1.8W nominal (into 50
Ω load) 
Receiver 
Frequency range 
851 – 870MHz 
Channel spacing 
25 kHz for RD-LAP 19.2 kbps 
12.5 kHz for RD-LAP 9.6 kbps 
Sensitivity (*) 
< -113dB (5% PER conducted, 19.2kbps) 
RSSI 
-120dBm ~ -45dBm 
Modem Battery 
Battery  
Externally replaceable Li-Ion type 
3.6V nominal, 920mA/hour  
Protection circuit 
Prevents overcharge and deep discharge 
Note - Extreme temperature operation will degrade battery life. 
Environmental Conditions 
Operating temperature 
0
°C to 45°C 
Storage temperature 
-20
°C to 60°C 
Relative humidity 
5-95% Non condensing 
 
(*) Receiver sensitivity excludes influence of the iPAQ Pocket PC RFI emissions. Over-the-air performance varies 
with iPAQ model and antenna used.