Wavenet Technology Pty Ltd. DWM0001 Benutzerhandbuch
Getting Started____________________________________________________________Dualwave M User Manual
Wavenet Technology
12
Charging the Dualwave M’s Battery
Your Dualwave M’s lithium battery is supplied discharged. For
optimum performance, you should charge it fully before use. If during
use, the Dualwave M’s On/Low battery indicator displays flashing red,
the battery needs immediate recharging.
optimum performance, you should charge it fully before use. If during
use, the Dualwave M’s On/Low battery indicator displays flashing red,
the battery needs immediate recharging.
The Battery Charger charges both the PDA and the modem. However,
The Dualwave M’s battery powers only the modem, not the PDA.
The Dualwave M’s battery powers only the modem, not the PDA.
Follow the steps below to charge the PDA and Dualwave M’s battery:
1. Connect your PDA to the Dualwave M first, if you intend to charge
both your PDA and the Dualwave M together.
2. Attach the battery charger connector to the battery charger socket
located on the left hand side of the unit.
3. Plug the battery charger into a power source for approximately four
hours. The PDA and modem indicators on the battery charger
display red while charging.
display red while charging.
Note: Perform an overnight charge when charging the Dualwave
M’s battery for the first time.
M’s battery for the first time.
4. When the PDA and modem indicators on the battery charger
change to green, both batteries are fully charged. If only one
indicator changes to green, only one battery is fully charged.
indicator changes to green, only one battery is fully charged.
5. Unplug the battery charger from the power source.
6. Detach the battery charger connector from the battery charger
socket.
Battery Charger
Battery Charger connector
PDA indicator
Modem indicator
On/low battery indicator
Battery Charger socket