Wavenet Technology Pty Ltd. DWM0001 Benutzerhandbuch
Dualwave M User Manual ____________________________________________________Using Your Dualwave M
17
Wavenet Technology
Using Your Dualwave M
Ensure your Dualwave M is fully charged, the Modem Tools software
has been installed and the unit is attached to the PDA before use, as
described earlier.
has been installed and the unit is attached to the PDA before use, as
described earlier.
Press the On/Off button on the Dualwave M. The On/Low battery
indicator should display slow flashing green (once per second). If it
displays flashing red, the battery needs charging. See the previous
section, Charging the Dualwave M’s Battery on page 13, for further
information.
indicator should display slow flashing green (once per second). If it
displays flashing red, the battery needs charging. See the previous
section, Charging the Dualwave M’s Battery on page 13, for further
information.
The Online indicator will display slow flashing green (once per
second) when the modem has registered with the wireless network.
second) when the modem has registered with the wireless network.
Switch your PDA on. The PDA is now ready for use.
Note: The network profile is set by default for the Dualwave M to be
used in U.S.A. To use the Dualwave M in Canada, this setting must be
changed. See page 20 for information on changing the network profile.
used in U.S.A. To use the Dualwave M in Canada, this setting must be
changed. See page 20 for information on changing the network profile.
On/Off button
On/Low battery
indicator
indicator
Online indicator
Data Comms Modem connector
Data Interface Port
Data Comms PC USB connector