Wavenet Technology Pty Ltd. DWM0001 Benutzerhandbuch

Using Your Dualwave M ____________________________________________________Dualwave M User Manual

Wavenet Technology

24

Firmware is the resident software installed on your Dualwave M.

For optimum performance ensure that you are using the latest firmware
version.

Follow the procedure below to check the version number of the
firmware currently loaded on the Dualwave M.

1.  Connect your PDA to the Dualwave M as described previously.

2.  Switch your PDA on.

3.  Tap the Modem Tools icon 

 from the main screen. By

default the Info tab is displayed.

4.  From the Info tab, check the version number of the firmware.

Using your web browser on your PC, navigate to the download site and
check for the latest version of the Dualwave M firmware. If the version
on the web is later than the firmware version on your Dualwave M,
follow the procedure below.

1.  From the web site, download the self-extracting file and save it

to your hard drive.

2.  Connect the Data Comms Modem connector to the Dualwave

M’s Data Interface port. This is located at the front of the
Dualwave M.

3.  Connect the Data Comms PC serial connector to a COM

(serial) port on your computer. Note that the Data Comms PC
serial connector is a 9-pin plug. If your computer has a 25-pin
serial port you will need a 9-pin to 25-pin adapter.

4.  Press the Dualwave M’s On/Off button to switch the

Dualwave M on.

Data Comms PC USB
connector

Data Comms Modem connector

Data Comms PC serial
connector (9-pin)