Worldpicom Corporation JD712 Benutzerhandbuch
1
Chapter 1. Terminal switch operation
When the condition of the Terminal is not good,
it may be improved by ON/OFF of the main switch.
[Example]
• Display screen does not change when you check-in or check-out.
• There is no response to touch a button on the screen that you want to order
• Display screen does not change when you check-in or check-out.
• There is no response to touch a button on the screen that you want to order
(It seems like “freeze”)
• Even if the "clear error" from the MIS, will not stop flashing red.
(communication error)
• Do not be started.
Note: Please do not touch except when trouble shooting as much as possible.
Note: Please do not touch except when trouble shooting as much as possible.
At the top right side of the Terminal, there's a hole
0.5 ~ 1 mm, it is the power switch.
Please don’t use except when dealing with trouble.
The above switches, use the dedicated reset pin.
0.5 ~ 1 mm, it is the power switch.
Please don’t use except when dealing with trouble.
The above switches, use the dedicated reset pin.
Power switch
Enlarged view