Arescom Inc. AG1000PRO Benutzerhandbuch
HARDWARE INSTALLATION
12
AresGate 1000 User’s Installation Guide
You have 3 options to connect to the Ethernet depending on your
network environment:
network environment:
Option 1.
To a single PC: Attach the included Ethernet cable
to the Ethernet port on a PC.
to the Ethernet port on a PC.
Option 2.
To a hub with uplink port available: Attach the
Ethernet cable to the uplink port on a hub.
Ethernet cable to the uplink port on a hub.
Option 3.
To a hub with non-uplink port available: Attach a
crossover Ethernet cable (Not included) to the non-
uplink ports on a hub.
crossover Ethernet cable (Not included) to the non-
uplink ports on a hub.
Step 4.
Once the router is powered on, the LAN LED on the front panel
should lit green to indicate a valid Ethernet connection. If the
LAN LED is not lit, repeat steps 1 through 3.
should lit green to indicate a valid Ethernet connection. If the
LAN LED is not lit, repeat steps 1 through 3.
10BaseT WAN Interface Connection
Step 1.
Locate your Ethernet cable.
Step 2.
Attach the Ethernet cable to the 10BT WAN
connector of your AresGate router.
connector of your AresGate router.
Step 3.
Attach the other end of the Ethernet cable to the Ethernet port
of your Cable modem or DSL modem.
of your Cable modem or DSL modem.
Step 4.
Once the router is powered on, the WAN LED on the front
panel should lit green to indicate a valid WAN connection. If the
WAN LED is not lit, repeat steps 1 through 3.
panel should lit green to indicate a valid WAN connection. If the
WAN LED is not lit, repeat steps 1 through 3.
2.4 Connect the 56K Analog
Modem
*
Step 1.
Plug the included RJ-11 to RJ-11 telephone
cable into the 56K Line port of the AresGate
router.
cable into the 56K Line port of the AresGate
router.
Step 2.
Plug the other end of the telephone cable into
the telephone outlet on the wall or within your home.
the telephone outlet on the wall or within your home.
Step 3.
Once you successfully establish connection using the 56K
modem, the 56K LED on the front panel should lit green to
indicate a valid modem connection (Refer to the
modem, the 56K LED on the front panel should lit green to
indicate a valid modem connection (Refer to the
section on how to connect the 56K modem).
*
For AresGate 1000 Pro model only