Arescom Inc. AG2560 Benutzerhandbuch
AG2500Series Software User’s Guide
June, 2002
5
CHAPTER 2:
HARDWARE INSTALLATION
This chapter describes the front/back panel layout and installation procedure for Ares-
Gate.
Gate.
2.1 Front Panel Information
Figure 2.1
AG2500 Front Panel
PWR (Power)
A PWR LED is ON when power is supplied to the AresGate.
DIAG (Diagnostic)
The DIAG LED indicates the AresGate is in a self-diagnostic mode during boot-up.
Once the AresGate boots up successfully, the LED will turn off. If there is a software
malfunction or a problem with the device, the LED will remain on.
Once the AresGate boots up successfully, the LED will turn off. If there is a software
malfunction or a problem with the device, the LED will remain on.
WAN
The WAN LED displays the 10BaseT DSL LINE port connection status between the
AG2000 and a DSL line. The WAN LED flashes during the initialization of the DSL
line. When DSL synchronization is achieved, it remains solid on.
AG2000 and a DSL line. The WAN LED flashes during the initialization of the DSL
line. When DSL synchronization is achieved, it remains solid on.
LAN
The LAN LED displays the 10BaseT Ethernet connection between the AG2000 and
an Ethernet network. The LAN LED is solid on when a valid Ethernet link is estab-
lished. The LED flashes when data is flowing from/to this Ethernet port.
an Ethernet network. The LAN LED is solid on when a valid Ethernet link is estab-
lished. The LED flashes when data is flowing from/to this Ethernet port.
WLAN
The WLAN LED flashes very slow when there is no activity on this wireless port.
The LED flashes quickly when data is flowing from/to this port.
The LED flashes quickly when data is flowing from/to this port.