Wistron Corporation TP00043ASF Benutzerhandbuch

Seite von 12
The NFC device has been tested and found to comply with the limits regarding IC
RSS-210, Low-power Licence-exempt Radiocommunication Devices.
Digitizer function
If you find an indication "IC: 4182A-TP00043AWD" on the label at the bottom side
of your tablet, your tablet employs a digitizer function which is able to sense the
Digitizer Pen shipped associated with your tablet. The digitizer emits extra low
power radio frequency and complies with the IC standard (RSS-210).
Low power license-exempt radiocommunication devices
(RSS-210)
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
The transmitter devices have been designed to operate with the antennas
integrated in the tablet, and having a maximum gain of within 3 dBi.
The maximum antenna gain permitted for devices in the 5250-5350 MHz,
5470-5725 MHz, and 5725-5825 MHz bands complies with the e.i.r.p. limit in
section A9.2 of RSS-210.
When you use a wireless LAN adapter in the 802.11 a/n transmission mode:
The devices for the band 5150–5250 MHz are only for indoor usage to reduce
potential for harmful interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users (meaning they have priority)
of 5250–5350 MHz and 5650–5850 MHz and these radars could cause
interference and/or damage to LELAN (Licence-Exempt Local Area Network)
devices.
Exposure of humans to RF fields (RSS-102)
The tablets employ low gain integral antennas that do not emit RF field in excess of
Health Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada's Web site at http://www.hc-sc.gc.ca/
The radiated energy from the antennas connected to the wireless adapters
conforms to the Canada Portable RF exposure limit regarding IC RSS-102 Issue
4 clause 4.1 set forth for an uncontrolled environment, and are safe for intended
operation in the conventional setting. The further RF exposure reduction can be
achieved if the product can be kept as far as possible from the user body or set
the device to lower output power if such function is available.
5