Wistron Corporation X60T Benutzerhandbuch

14. Connect the cables to the new PCI Express Mini Card. 

Note: If the new PCI Express Mini Card has three connectors, as in the next drawing, you must attach 

the cables to the right and left connectors. If you attach either cable to the center connector, the connection 
speed will be lower.

15. Replace the upper case and push down on the front and sides of the upper case. 

16. Rotate the display counterclockwise 45 degrees and close it. Turn the machine over and tighten the screws 

you have removed in step 7. 

Store the Tablet Digitizer Pen back in its slot

. 

Reinstall the keyboard

. 

Reinstall the battery

. 

20. Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on. 

  
  
If your computer has a Multiple Input Multiple Output (MIMO) feature, the PCI Express Mini Card with three 
connectors comes with the computer. To replace the card for the MIMO feature, do as follows: 

1. Turn off the computer; then disconnect the ac adapter and all cables from the computer. Wait for a few 

minutes, till the inside of the computer cools, before you start the following procedures. 

2. Close the computer display, and turn the computer over. 

Remove the battery

. 

Remove the Tablet Digitizer Pen

. 

Remove the keyboard

. 

6. Close the computer display, and turn the computer over. 

7. Remove the screws that secure the upper case.

3/6 ページ

Installing and replacing the PCI Express Mini Card for wireless LAN connection

2006/09/11

file://C:\WORK\Dali1_Tama\UPGRADE\replpci.htm