Wistron Corporation X60T Benutzerhandbuch
Before you start, print these instructions.
Some ThinkPad(R) models have a PCI Express Mini Card slot for wireless WAN connection. To replace
the PCI Express Mini Card with a new one, follow the procedure below.
To find the position of the PCI Express Mini Card for wireless WAN connection in your computer, click
here
.
Danger: During electrical storms, do not connect the cable to or disconnect it from the telephone
outlet on the wall.
Danger: Electric current from power, telephone, and communication cables is hazardous. To avoid
shock hazard, disconnect the cables before opening the cover of this slot.
Attention: Before you start installing a PCI Express Mini Card, touch a metal table or a grounded
metal object. This action reduces any static electricity from your body. The static electricity could damage
the card.
the card.
To replace the PCI Express Mini Card, do as follows:
1.
Turn off the computer; then disconnect the ac adapter and all cables from the computer. Wait for a few
minutes, till the inside of the computer cools, before you start the following procedures.
minutes, till the inside of the computer cools, before you start the following procedures.
2.
Close the computer display, and turn the computer over.
3.
Remove the battery
.
4.
Remove the Tablet Digitizer Pen
.
5.
Remove the keyboard
.
6.
Close the computer display, and turn the computer over.
7.
Remove the screws that secure the upper case.
8.
Open the display to about 90 degrees; then rotate the display clockwise 45 degrees as shown in the
drawing.
drawing.
Replacing the PCI Express Mini Card for wireless WAN connection
1/3 ページ
Replacing the PCI Express Mini Card for wireless WAN connection
2006/10/02
mk:@MSITStore:C:\Documents%20and%20Settings\KNAKA\My%20Documents\DA...