Wistron Corporation X60T Benutzerhandbuch

Align the contact edge of the new Wireless WAN Card with the corresponding socket contact of the 
computer. 

Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure 
the card with the two screws. Reattach the antenna, and connect the cables to the new card. 

Note: Depending on the system configuration of your computer, the card may have only one 

connector.

Replace the upper case and push down on the front and sides of the upper case. 

Rotate the display counterclockwise 45 degrees and close it. Turn the machine over and tighten the 
screws you have removed in step 7. 

Store the Tablet Digitizer Pen back in its slot

. 

Reinstall the keyboard

. 

Reinstall the battery

. 

Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on. 

  
   

3/3 ページ

Replacing the PCI Express Mini Card for wireless WAN connection

2006/10/02

mk:@MSITStore:C:\Documents%20and%20Settings\KNAKA\My%20Documents\DA...