Wistron Corporation MS2146 Benutzerhandbuch

o  The use of wireless devices in hospitals is restricted to the limits set forth by each 

hospital.  

•  Antenna use:  

o  In order to comply with FCC RF exposure limits, low gain integrated antennas 

should be located at a minimum distance of 20 cm (8 inches) or more from the 
body of all persons.  

o  High-gain, wall-mount, or mast-mount antennas are designed to be 

professionally installed and should be located at a minimum distance of 30 cm 
(12 inches) or more from the body of all persons. Please contact your 
professional installer, VAR, or antenna manufacturer for proper installation 
requirements.  

•  Explosive Device Proximity Warning (see below)  

•  Antenna Warning (see below) 

•  Use on Aircraft Caution (see below) 

•  Other Wireless Devices (see below) 

•  Power Supply (Access Point) (see below) 

Warning: Do not operate a portable transmitter (such as a wireless network device) near 

unshielded blasting caps or in an explosive environment unless the device has been modified to 
be qualified for such use. 

Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it is recommended 

for the Intel(R) PRO/Wireless LAN 7100 3B Mini PCI Adapter installed in a desktop or portable 
computer, that the antenna for this device be installed so as to provide a separation distance of al 
least 20 cm (8 inches) from all persons and that the antenna must not be co-located or operating 
in conjunction with any other antenna or radio transmitter. It is recommended that the user limit 
exposure time if the antenna is positioned closer than 20 cm (8 inches). 

Warning: Intel(R) PRO/Wireless LAN products are not designed for use with high-gain 

directional antennas. Use of such antennas with these products is illegal. 

Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency 

wireless devices because their signals could interfere with critical aircraft instruments. 

Safety Notices for Other Devices in the Wireless Network: Refer to the documentation 
supplied with wireless Ethernet adapters or other devices in the wireless network. 

Caution: Due to the fact that the frequencies used by 802.11a and 802.11b wireless LAN 

devices may not yet be harmonized in all countries, 802.11a and 802.11b products are designed 
for use only in specific countries, and are not allowed to be operated in countries other than those