drakesystem co. ltd DSCAB002 Benutzerhandbuch

Seite von 10
    •The receiver enters into the change of MODE with beep tone
when the
      MODE KEY is pressed for more then 2 seconds.
    •The procedure for the change of MODE is as follows.
       • RF RECEIVING ON/OFF
       • SELECT OF ALERT TONE or VIBRATION
       • ADJUST OF CLOCK
       • WAKE-UP ALARM ON/OFF
       • ADJUST OF WAKE-UP ALARM TIME
        •The left button will be used when the change of MODE is
required.
        •When  the  MODE-KEY  is  usually  pressed  shortly,  the  MODE-
KEY is used
for the display of previous status or reset of current
status.
      1-2-5.  THE USAGE OF PARKING TIMER
    •The receiver enters into change of PARKING TIMER with beep
tone when
      the left button is pressed for more then 2 seconds. At
that time, the
      clock on the LCD will blank which enables the change of
PARKING TIMER.
    •At this mode, the left button is used to increase the hour
or minute
      when the icon is blanking and the right button is used to
move the
      blinking icon to the right.
    •The icon of PARKING TIMER is blanking when the PARKING
TIMER is being
      operated The operation of PARKING TIMER is cancelled when
the left
 
 
  
 
 button is pressed for more then 2 seconds during the
operation of
      PARKING TIMER.
    •The previous PARKING TIMER is memorized in the memory of
the receiver.      You can use the previous PARKING TIMER
when you press the left button
      for more than 2 seconds.
  1-2-6.  THE EXCHANGE OF BATTERY
    •Please  exchange  the  current  battery  with  new  battery
within 2 days
      when the icon of low battery on the LCD is turned on.
 
 
 
 
•The receiver memorizes the CURRENT MODE, ALARM TIME,
PARKING TIME and
 
 
  
 
 ID into the memory of the receiver, but it does not
memorize the
 
 
  
 
 CURRENT TIME. When the battery is exchanged with new
battery, you should re-adjust your clock on the receiver.
The current time will be set to 12:00 when you change the
battery.