drakesystem co. ltd DSCAR002 Benutzerhandbuch

              “NO CHIRP MODE”, the car acts the same way above, but without chirp. 

 

2-2-2.  The car memorizes the status of intrusion ( door open )in the arm mode   

and alerts it when the car is disarmed. The car alerts 4 times light flashing and 4 

times chirps. The remote controller shows 4 times of green LED and 

long beeps. The car alerts 3 chirps and 3 light flashing for the triggering 

of shock sensor during arm mode. 

 

2-3. CAR 

FIND  

When the button “AUX” is pressed shortly, the remote car shows audible beep and   

visual lighting. The remote controller shows flashing of green LED and sounds   

short beep four times. 

 

2-4.  PANIC (FOR YOUR PERSONAL SAFETY ) 

When the button “LOCK” or “UNLOCK” is pressed more than 2 seconds, 

          the car will start alarming and flashing for 45 seconds. The panic can be   

removed by pressing any button and it is helpful for your personal safety.   

 

2-5. TRUNK 

OPEN 

Pressing the button “ASTERISK” for more than 2 seconds can open 

          the trunk of the car. At that time, the remote controller flashes green LED 5 times 

     and sounds short beep 5 times. 

 

2-6. VALET 

MODE 

Valet mode is used to prevent from alarm system arming or triggering. 

        The alarm should be put into valet mode when the vehicle is being serviced. 

        Press the button ”AUX” more than 2 seconds during the car key is in the 

        position of “ACC” in the key box, then VALET mode is activated.  

At the VALET mode, the LED on the base communication module turns ON 

continuously 

        and the remote controller turns on green LED and sounds one dual beep. And also 

      the car alerts audible chirp with visual light flashing. Now the car is   

in VALET mode. Only “LOCK” “UNLOCK” & “AUX” can be activated.   

Even though the “LOCK” is activated, the car does not enter into ARMING during   

VALET mode.   

As the VALET mode is toggle function, the car can be return to the DISARM mode   

when the button “AUX” is pressed once again at the same condition.  

When the VALET mode is removed and returns to the DISARM mode, 

the car alerts audible chirp with visual light flashing.   

And the remote controller shows the green LED flashing and 2 times dual beeps.   

 

2-7. PROGRAMMABLE 

FUNCTIONS 

There are 4 programmable functions for the operation of the caralarm system.