Wilson Electronics LLC 2B4121SD Benutzerhandbuch

4

The outside antenna must be installed 
vertically.  Signal performance will be 
degraded if the antenna is not vertical.

The antenna cable may be run through 
the door to the amplifi er.

For a more professional-looking 
installation, the antenna cable may 
be run under the door seal.  Carefully 
pull down the door seal.  Run the 
cable through the seal and push the 
seal back into place.  This prevents 
constant wear and tear on the cable as 
the door opens and closes.

The antenna cable is small enough 
to easily tuck under the door seal or 
plastic molding.

To receive the best cell signal, select a location in the center of the vehicle’s roof 
at least 12 inches away from any other antennas and free of obstructions.

Follow the specifi c antenna installation instructions included with the outside antenna 
(sold separately).

In-Vehicle

Warning:  The outside antenna 

must be installed with a separation 
distance of at least 8 inches from any of 
the vehicle’s occupants or nearby persons 
and must not be located or operating in 
conjunction with any other antenna or 
amplifi er.