Wilson Electronics LLC 2B5125 Benutzerhandbuch

Warning: DO NOT use phone covers that have chrome or any other metallic surface . It may block  

 

cellular signals

The Outside Antenna must be installed vertically .  

Antenna performance will be degraded if the 

antenna is not vertical .
The antenna cable is small yet strong enough that it 

may be shut in most vehicle doors without damaging 

the cable .

For a more professional looking installation, run the 

antenna cable under the door seal .  Carefully pull 

down the door seal .  Run the cable under the seal 

and push the seal back into place .  This prevents 

constant wear and tear on the cable as the door 

opens and closes .  The antenna cable is small 

enough to easily tuck under the door seal or 

plastic molding .

Vehicle Installation
1. Install the Outside Antenna
To receive the best cell signal, select a location for the Outside Antenna that is preferably in the center 

of the vehicle’s roof, 12 inches away from any other antennas, free of obstructions, and at least 6 inches 

from the rear or side windows or sunroof .

General
Your Wilson Electronics Sleek has been carefully engineered to significantly improve the performance 

of your phone . Together with an Outside Antenna, the Sleek’s state-of-the-art circuitry is designed to 

increase your phone’s signal to and from the cell tower . The Sleek reduces disconnects and dropouts 

and increases data communication rates on 2G, 3G networks and 4G networks (in some models) . 
How it Works
With the phone in the cradle and while using a wireless Bluetooth headset (or hands free device) the 

Outside Antenna collects the cell tower signal and sends it through the cable to the Sleek .  The signal 

is then boosted by the Sleek and sent to the phone . When the phone transmits, the signal is picked up 

wirelessly and boosted by the Sleek and transmitted back to the cell tower through the Outside Antenna .

signal to and  

from cell tower

Sleek w/phone

Sleek w/phone