Wilson Electronics LLC 460020 Benutzerhandbuch
4
CELL PHONE SIGNAL BOOSTER HOME 4G
______
Step 2: Measure Signal
Step 2: Measure Signal
Strength: Inside Antenna
Turn off your cell phone’s WiFi to ensure you are checking the
cellular connection. The dBm reading will be refreshed every 30-60
seconds.
Want faster results? Once you have a reading, turn on airplane
mode. Wait 15 seconds. Turn off airplane mode. The signal strength
reading is refreshed.
Walk around your home/office taking signal strength readings until
you find the area that has the worst reception.
Remember: Place your Inside Antenna in this poor signal area.
Remember: Place your Inside Antenna in this poor signal area.
•
Connect the booster directly to the Inside
Antenna. Keep at least 18” of separation
between the Inside Antenna and the Booster
and face the Inside Antenna away from the
Booster.
and face the Inside Antenna away from the
Booster.
•
Keep the Booster away from direct sunlight,
heat (<150°F), moisture and 6” away from oth-
er objects (for ventilation). Ensure the Booster
is near an outlet.
heat (<150°F), moisture and 6” away from oth-
er objects (for ventilation). Ensure the Booster
is near an outlet.
Please note:
-100
dBm
-95
dBm
-90
dBm
SIGNAL STRENGTH
EXCELLENT
GOOD
FAIR
POOR
DEAD ZONE
3G/1x
(typically voice)
-70dBm
-71 to -85dBm
-86 to -100dBm
-101 to -109dBm
-110dBm
4G/LTE
(typically data)
-90dBm
-91 to -105dBm
-106 to -110dBm
-111 to -119dBm
-120dBm