Wilson Electronics LLC 8013SB Benutzerhandbuch

6

7

 Lightning protection  is recommended for all installations. 

6.1  3dB Dual-Band Splitter Part # 859911

6.2  Coax Cable Extensions 50Ω (see chart on next page)

6.3  Antenna Options:

301103 - Magnet Mount 5 dBi   

301124 - Yagi 13 dBi

301106 - Low Profile 2.2 dBi

301113 - Mini Magnet 2.12 dBi

301121 - Dome 2.5 dBi

301122 - Panel 7 dBi

301123 - Dual Polarity Dome, Unity

6.4  N-Male to FME-Male adapter Part # 971113

6.5  Lightning Surge Protection Part # 859902

If you need further assistance with your installation:

1)  Call Toll-Free 866-294-1660  8:00 AM – 4:30 PM (Mountain Time)

2)  E-mail tech support at tech@wilsonelectronics.com

3)  Visit 

  The outside antenna used with this amplifier must be fixed-mounted on an out-

door permanent structure with a separation of at least 20 feet from all persons 

during normal operation.

The inside antenna used with this amplifier must have a separation distance 

from all persons that is at least:

 

 

9 inches for the 2.5 dBi Dome antenna.

 

 

14 inches for the 7 dBi Panel antenna. 

The amplifier must not be co-located or operating in conjunction with any 

other antenna or amplifier.

Verify that both the Outside and Inside Antennas are connected before plug-

ging in the AC/DC power supply to the power outlet.

Lightning protection is recommended for all installations. 

Lightning protection is required for warranty validation.

The information provided by Wilson Electronics, Inc. is believed to be complete and accurate.  However, no respon-

sibility is assumed by Wilson Electronics, Inc. for any business or personal losses arising from its use, or for any 

infringements of patents or other rights of third parties that may result from its use.

Copyright © 2006 Wilson Electronics, Inc.