Wilson Electronics LLC 8040SB Benutzerhandbuch
5
For maximum gain, keep a separation
distance of at least 75 ft between the
outside and inside antennas.
AC/DC
Power Supply
Amplifier
Inside Antenna to
Amplifier Connection
Cell
Site
Supports
Multiple
Users
Outside Antenna
Yagi Antenna Shown
Outside Antenna to
Amplifier Connection
Inside Antenna
Optional Dome
Antenna Shown
AMPLIFIER LAYOUT
DIAGRAM
If using the Yagi Antenna,
Make sure the Yagi is not pointed
toward the inside antenna.
5. AMPLIFIER SPECIFICATIONS FOR
CELLULAR
MODEL
Part #
801106
Frequency
824-849 MHz Uplink 869-894 MHz Downlink
Gain (up/down)
60 dB Max
Flatness (up/down)
+/- 2.5 dB
Max RF (up/down)
+ 32 dBm
Noise Figure (down)
3 dB nominal
Isolation
Uplink/Downlink More than 90 dB
Power Consumption
13.8 V, 1.5 A
Receiver overload light
Outside antenna has exceeded
-
5 dBM
Transmit overload light
Inside antenna has exceeded -5 dBM
AMPLIFIER SPECIFICATIONS FOR
iDEN
MODEL
Part #
804006
Frequency
806-821MHz Uplink 851-866MHz Downlink
Gain (up/down)
60 dB Max
Flatness (up/down)
+/- 2.5 dB
Max RF (up/down)
+ 32 dBm
Noise Figure (down)
3 dB nominal
Isolation
Uplink/Downlink More than 90 dB
Power Consumption
13.8 V, 1.5 A
Receiver overload light
Outside antenna has exceeded -5 dBM
Transmit overload light
Inside antenna has exceeded -5 dBM
AMPLIFIER PHYSICAL
SPECIFICATIONS
Connectors
N-Female 50 Ohms
Dimensions
4.5” x 3.5” x 1.25”
(11.4 x 8.9 x 3.2 cm)
Weight
1.5 lbs (682 gr)