ECORE TECHNOLOGY COMPANY LIMITED HT1072 Benutzerhandbuch

Model Name

：HT1072

Power Supply: Micro USB   

Built-in Lithium Ion batteries: 1400mAh,3.7V 

Touch the volume button on the unit or control the audio device volume directly to 

adjust the volume

   Hands free function

1.  The unit will play ringtone when there is a incoming call

2.  At this time, press the multi-function button to answer the call, and talk through 

   the microphone

   Charge   

1.  Connect the standard USB end of the supplied USB cable to a USB power 

    source (like PC, USB power adapter…etc.)

2.  Connect the Micro USB jack to the USB charging port on the DC IN . The 

    charging indicator will light up while charging

3.  It will take about 5 hours for fully charge the Bluetooth speaker

4.  The charging indicator working mode:

    When charging, red LED indicator will be lit up.

    When the battery is fully charged, red LED indicator will go out. 

Note: if the unit is not to be used longer than 7 days, please charge the uni for 10 

minutes before turn on the unit.

Note: All specifications are subject to change without notice. 

Product Name: Adventure Box

 

（1） Check if the blue Bluetooth indicator lights on, if the indicator goes off, please 

     switch the ON/OFF button to turn on the unit, if the blue Bluetooth indicator 

     doesn't light on yet, please charge the unit                                                                                                                                            

（2）P

  erhaps there are many Bluetooth devices around the surroundings to 

     interfere the searching, please close the Bluetooth function in the device you 

     don't need

（3）P

  ower off and then power on the unit, to restart the Bluetooth function of the 

     unit or your Bluetooth device

（4）U

  nplug the AUX cable from the unit, and re-pair the unit and the 

   Bluetooth device

Question: The sound occurs staccato when play

？

Solution

：

    to play.

3.  Press the multi-function button to pause or play your music as you need.

Line IN

：

1.  Plug one end of the supplied Aux cable to the “AUX” port in the back of unit, and 

   then plug the other end of the cable to audio device. 

2.  Choose directly your favorite music in the audio device to play

3.  Press the multi-function button to pause or play your music as you need.

    Adjusting the volume 

Output power: 3W 

Bluetooth Profile Supported: A2DP V1.2, AVRCP V1.4 

Working range: up to 8m

Working atmosphere: 0

℃-40℃/20%-90%RH

Please follow the instructions below before clear the unit

   Power off the unit first before clear

   Use a soft, dry, lint-free cloth to wipe gently

   Do not use alcohol, benzene, thinners or other chemical detergents as 

   these can cause the casing to be warped or discolored

Storage  

   If the unit will not be used for an extended period of time, power off the unit and 

   place the unit with accessories into the package

   Do not set the unit in a damp, high temperature or the sun point-blank place 

Question: Can't pair successfully after multiple connections

？

Solution

：

（1） Make sure the working distance is in 8m

（2）C

  lear away the block between the unit and the Bluetooth device to prevent the 

     poor connecting

（3）P

  lease check if the unit and the Bluetooth device is in low battery, if so, please 

     charge the unit and your Bluetooth device

CE 2200    

BIJELA

www.bijela.com.cn

ECORE  TECHNOLOGY  COMPANY  LIMITED        

Made in China

This device complies with Part 15 of the FCC Rules. Operation is subject to

 the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference 

     that may cause undesired operation. 

Warning: Changes or modifications not expressly approved by the party 

                 responsible for compliance could void the user's authority to operate

                the equipment.

NOTE: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

 designed to provide reasonable protection against harmful interference in a 

residential installation.This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions,

 may cause harmful interference to radio communications. However, there is no

 guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to

 try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated with 

minimum distance 20cm between the radiator & your body.