Netgear 08200090 Benutzerhandbuch

Safeguarding Your Network

2-11

1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default 

user name of admin and default password of password, or using whatever LAN address and 
password you have set up.

2. On the modem router main menu, select Add a WPS Client, and then click Next. The 

following screen displays:

By default, the Push Button (recommended) radio button is selected.

3. Either press the WPS button on the side of the modem router, or click the onscreen button.

The modem router tries to communicate with the client for 2 minutes.

4. Go to the client wireless computer, and run a WPS configuration utility. Follow the utility’s 

instructions to click a WPS button.

5. Go back to the modem router screen to check for a message.

The modem router WPS screen displays a message confirming that the client was added to the 
wireless network. The modem router generates an SSID, and implements WPA/WPA2 
wireless security. The modem router will keep these wireless settings unless you change them, 
or you clear the Keep Existing Wireless Settings check box in the Advanced Wireless 
Settings screen.

 See 

6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these 

settings in the Wireless Settings screen. See 

To access the Internet from any computer connected to your modem router, launch a browser such 
as Microsoft Internet Explorer or Mozilla Firefox. You should see the modem router’s Internet 
LED blink, indicating communication to the ISP.

Note: If no WPS-capable client devices are located during the 2-minute time frame, the 

SSID will not be changed, and no security will be implemented on the modem 
router.

WPS button