Netgear 13200235 Benutzerhandbuch

Gateway Settings 

55 

 

6.  In the Allow Remote Access By section, specify the external IP addresses to be allowed 

to access the gateway’s remote management: 

7.  For enhanced security, restrict access to as few external IP addresses as practical 

8.  Select one of the following: 



  To allow access from a single IP address on the Internet, select the Only This 

 radio button. Enter the IP address to be allowed access.  



  To allow access from a range of IP addresses on the Internet, select the IP Address 

 radio button. Enter a beginning and ending IP address to define the allowed 

range.  



  To allow access from any IP address on the Internet, select the Everyone radio 

button.  

9.  Specify the port number for accessing the web browser interface. 

■  Normal web browser access uses the standard HTTP service port 80. For greater 

security, enter a custom port number for the remote web management interface. 
Choose a number from 1024 to 65535, but do not use the number of any common 
service port. The default is 8080, which is a common alternate for HTTP. 

10. Click Submit. 

To use remote access: 

1.  Launch a Web browser on a computer that is not on your home network. 

2.  Type your gateway’s WAN IP address into your browser’s address or location field 

followed by a colon (:) and the custom port number.  

For example, if your external address is 134.177.0.123 and you use port number 8080, enter 
http://134.177.0.123:8080 in your browser. 

From the Network Setup page, you can specify how the gateway selects mobile networks and 
roaming, and receive network configuration updates from Sprint. 

1.  On a computer or wireless device that is connected to your gateway, launch a Web 

browser. 

2.  In the address or URL field of your browser, type http://myrouter.  

3.  When prompted to log in, enter admin for the user name and type the password. (The 

default password is password.)