Remotek Corporation WA220 Benutzerhandbuch
Wireless LAN Access Point User’s Manual
19
6.4.2. Modify Filtering Configuration
Select Filtering from Bridge submenu on Setup menu. If you check IP Routing,
only IP Packet will pass through AP between Ethernet and Wireless LAN.
6.4.3. Modify Privacy Options
only IP Packet will pass through AP between Ethernet and Wireless LAN.
6.4.3. Modify Privacy Options
Select Filtering from Wireless LAN submenu on Setup menu.
Key 1 ~ Key 4: Fill keys for WEP. 13 octets for 128-bit WEP, and 5
octets for 64-bit WEP.
Default Key: Select default key from Key 1 ~ Key 4.
WEP: Select WEP mode. 64-bit WEP, 128-bit WEP, or disable WEP.
WEP: Select WEP mode. 64-bit WEP, 128-bit WEP, or disable WEP.
6.4.4. Modify Wireless Operation Settings
Select Operation Settings from Wireless LAN submenu on Setup menu.
Access Point Name: Fill in User-Friendly Name.
ESSID: Fill in Access Point’s ESSID. Adaptors could roam over the APs
ESSID: Fill in Access Point’s ESSID. Adaptors could roam over the APs
that have same ESSID.
Channel: Working channel through Channel 1 ~ Channel 13
Fragmentation Threshold: Packet fragment size.
RTS Threshold: RTS will not send if the packet is smaller than RTS
Fragmentation Threshold: Packet fragment size.
RTS Threshold: RTS will not send if the packet is smaller than RTS